Alan's Tweed Bandmaster
These are a few pics I took of a Tweed 3x10" Bandmaster cabinet-in-progress.
Hope you enjoy them!
Here you can see (almost) all the parts cut out, ready for assembly.
From the left, the pieces are
-
the top and bottom 'narrow panels' (actually, I ended up using pine for
those panels. The ply looked too flimsy.)
-
Then the four 1" strips of ply to surround the edges of the baffle
-
Two 3/4" x 3/4" cleats that the rear panels screw into
-
The top/bottom/sides of the cabinet. I've already cut the 1/4" fingers,
as you can see.
The sheet of ply will become the baffle and back panels. The blue
plastic is just a sheet of blue plastic.
Next page...